reg test case failed - Printable Version +- PULP Community (https://pulp-platform.org/community) +-- Forum: PULP's Community forum (https://pulp-platform.org/community/forumdisplay.php?fid=1) +--- Forum: PULP General questions (https://pulp-platform.org/community/forumdisplay.php?fid=2) +--- Thread: reg test case failed (/showthread.php?tid=160) |
reg test case failed - HariniM - 12-27-2019 hi, I tried running interfaced GPIO with the test cases given in PULPino environment. after running testcases I am getting has test case failed. why test failed occurs. ** Warning: NUMERIC_STD."=": metavalue detected, returning FALSE # Time: 0 ps Iteration: 0 Instance: /tb/top_i/peripherals_i/apb_uart_i/UART_RXFF # ** Warning: NUMERIC_STD."=": metavalue detected, returning FALSE # Time: 0 ps Iteration: 0 Instance: /tb/top_i/peripherals_i/apb_uart_i/UART_TXFF # Using MEMLOAD method: PRELOAD # Using ri5cy core # [SPI] Enabling QPI mode # [adv_dbg_if] AXI4 WRITE 32 burst @1a107008 for 4 bytes. # Preloading memory # Preloading instruction memory from slm_files/l2_stim.slm # Preloading data memory from slm_files/tcdm_bank0.slm # [TRACER] Output filename is: trace_core_00_0.log #[SPI] Received 00000003 #[SPI] Test Failed # **Note :$Stop please respond thanks in advance. RE: reg test case failed - zhouqiang - 02-17-2020 hi, Have you solved the question now? I met the same error and I have no idea about that ? Can you give me some advice or help? Thanks |