Building an RTL simulation platform Error - Printable Version +- PULP Community (https://pulp-platform.org/community) +-- Forum: PULP's Community forum (https://pulp-platform.org/community/forumdisplay.php?fid=1) +--- Forum: PULP General questions (https://pulp-platform.org/community/forumdisplay.php?fid=2) +--- Thread: Building an RTL simulation platform Error (/showthread.php?tid=216) |
Building an RTL simulation platform Error - RiscV - 11-03-2020 Hi, I followed the readme file of pulpissimo for building an RTL simulation platform. After the following steps Code: source setup/vsim.sh I am getting error like this Code: make -C ../rtl/tb/remote_bitbang all I am using ModelSim - Intel FPGA Edition 20.3 (includes Starter Edition). Please help me .. RE: Building an RTL simulation platform Error - kgf - 11-03-2020 (11-03-2020, 10:24 AM)RiscV Wrote: I am using ModelSim - Intel FPGA Edition 20.3 (includes Starter Edition). Please help me .. That is the problem. You need a proper Questasim, not something that ships as part of the Intel/Altera. It could well be that the system can be made to run with the Intel/Altera Starter edition version, we just do not have the time to work it out. If you fix the issue (it is one of the most commonly asked ones) and issue a pull request on the GitHub it would help many.. Sorry about that, KGF |