PULP Community
simulation qspi in FPGA - Printable Version

+- PULP Community (https://pulp-platform.org/community)
+-- Forum: PULP's Community forum (https://pulp-platform.org/community/forumdisplay.php?fid=1)
+--- Forum: PULP General questions (https://pulp-platform.org/community/forumdisplay.php?fid=2)
+--- Thread: simulation qspi in FPGA (/showthread.php?tid=317)



simulation qspi in FPGA - HaiAnhWavelet - 05-10-2023

Hi, I'm trying run some tests about qspi in Genesy 2 broad but I have some problems. When run simulation with flash model, everything is good so I program it to my Kit. In genesys 2 have a qspi flash so I want to use it like a peripheral. In this reference, signals of qspi can connect via port in XDC file, expect qspi_sck. It must be connected via STARTUPE2. When I do so, it runs incorrectly. My test run through all code line but wave form in ocilloscope is different from Questasim.  Have anyone met this problem like that before?
Thanks


RE: simulation qspi in FPGA - internetdunyam - 05-17-2023

i am having the same problem. Can anyone share information on the subject?