CV32E40P/RI5CY Setup
#2
As far as I can understand you are trying to instantiate a RISC-V core on its own. While it is possible to construct a working system with memories and other peripherals, your life will be easier if you try an existing system where all these components have been instantiated.

From our group
https://github.com/pulp-platform/pulpissimo
https://github.com/pulp-platform/cheshire

are complete platforms that instantiate everything.

Although no FPGA mapping is yet available a simplified SoC we are now working on is Croc
https://github.com/pulp-platform/croc

And from our colleagues at EPFL there is the X-Heep
https://github.com/esl-epfl/x-heep

Check out also their FPGA emulation for X-HEEP
https://github.com/esl-epfl/x-heep-femu
Visit pulp-platform.org and follow us on twitter @pulp_platform
Reply


Messages In This Thread
CV32E40P/RI5CY Setup - by e0960179@u.nus.edu - 10-19-2024, 08:51 AM
RE: CV32E40P/RI5CY Setup - by kgf - 10-25-2024, 07:13 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)