FPGA build

I found that you have added more instructions (below) how to build and use virtual platform with Pulpissimo.
Thaks for that, I got virtual platform working and run Hello test on it.

Is there similar instructions for FPGA build? Is there somewhere build-fpga like build-gvsoc etc.?

"Building and using the virtual platform
Once the RTL platform is installed, the following commands can be executed to install and use the virtual platform:
git clone https://github.com/pulp-platform/pulp-builder.git
cd pulp-builder
git checkout b3b255b0f653fce950cf730972c8ad07b1be7bf0
source configs/pulpissimo.sh
source sdk-setup.sh
source configs/gvsoc.sh
cd ..
Then tests can be compiled and run as for the RTL platform. "

Best Regards,

Messages In This Thread
FPGA build - by Akim - 05-15-2019, 11:00 AM
RE: FPGA build - by kgf - 05-15-2019, 11:17 AM
RE: FPGA build - by Akim - 06-05-2019, 07:34 AM

Forum Jump: