GDB Debugging with JTAG on Ariane
#5
(11-27-2019, 01:32 PM)scmoritz Wrote: My bad. I forgot a 0 in the DRAM address. The base address should be 0x80000000 (that is one 8 followed by 3 + 4=7 zeroes)

Thanks alot, it is working now! Smile
Reply


Messages In This Thread
GDB Debugging with JTAG on Ariane - by jthoma - 11-26-2019, 09:58 AM
RE: GDB Debugging with JTAG on Ariane - by jthoma - 11-26-2019, 02:59 PM
RE: GDB Debugging with JTAG on Ariane - by jthoma - 11-27-2019, 02:12 PM

Forum Jump: