01-31-2023, 03:53 PM
oops good one..
I am not so experienced with these bards. I assume that the PMOD boards are connected directly to the GPIO pins of the FPGA. For example this could maybe work:
https://digilent.com/shop/pmod-usbuart-u...interface/
Not sure though. I do not think anyone here tried to run PULPissimo on Nexsys. Technically speaking there would be a JTAG connector somewhere on the board, so instead of simulating JTAG through USB, you could use a USB to JTAG dongle and connect.. But I am just writing these from the top of my head, not because I have tried, or know that these work. So please take this with a grain of salt..
I am not so experienced with these bards. I assume that the PMOD boards are connected directly to the GPIO pins of the FPGA. For example this could maybe work:
https://digilent.com/shop/pmod-usbuart-u...interface/
Not sure though. I do not think anyone here tried to run PULPissimo on Nexsys. Technically speaking there would be a JTAG connector somewhere on the board, so instead of simulating JTAG through USB, you could use a USB to JTAG dongle and connect.. But I am just writing these from the top of my head, not because I have tried, or know that these work. So please take this with a grain of salt..
Visit pulp-platform.org and follow us on twitter @pulp_platform