Questions regarding Runtime/SDK

I'm currently starting a project based on Pulpissimo with an Ibex core as Fabric Controller. I got everything set up as described in the Readme. The RTL simulation works fine and I got a (working) implementation running on a Nexys A7 board (ported from the Nexys Video implementation) which I want to use to test some peripherals.
I connect to the board by using a Digilent HS2 JTAG debugger with OpenOCD from the pulp-SDK.

At this point I have a few questions (and problems) regarding the runtime/PulpOS.

There are currently three repositories providing SW support for Pulp/Pulpissimo. The pulp-builder, pulp-sdk, and the pulp-runtime.

I understand that the pulp-runtime is currently a simplified version of the runtime. But as i noticed it seems to have different way of configuring/building.
A) As it is a newer runtime, do you plan to extend this further to replace the "old sdk" at some point?
B) Currently the pulp-runtime supports only the riscy core. Would it be possible to support the ibex as well?

The simple runtime worked on the FPGA out of the box with the riscy core. That was nice Smile 

In the readme of the pulpissimo the pulp-builder is the suggested package to use the runtime and therefor is the same as an SDK, right? But what is the pulp-SDK then?
The runtime and api files seems to be similar. But I encountered different problems with both when using the examples.

E.g. the hello uart example:
With the pulp-builder SDK the Code doesn't even reach the main() part but hangs somewhere during the boot/configuration part.
With the pulp-sdk i can use the UART with printf but not using the UART driver. Also only after using this fix.

C) Now I'm not quite sure which one to use. For which should I use my time to investigate my problems?

Also the SDK seems to use deprecated drivers for the examples (at least the name of the folder is like that). So..
D) Is there any documentation of the runtime and its APIs except for the auto generated docs and the examples in the SDK?
The pulp-builder has an empty Doc folder.

E) Regarding a comment on this issue the support of the SDK regarding the ibex core is not really complete. It seems like nothing has changed much since then.
Are you planing to keep the support for the ibex core?

I hope someone finds the time to answer my questions and I'm looking forward to work with the pulp platform. Smile

Messages In This Thread
Questions regarding Runtime/SDK - by heavySea - 06-22-2020, 01:54 PM
RE: Questions regarding Runtime/SDK - by bluewww - 06-29-2020, 12:16 PM
RE: Questions regarding Runtime/SDK - by heavySea - 06-29-2020, 01:00 PM

Forum Jump:

Users browsing this thread: 1 Guest(s)