Which SDK to be used to compile applications for FPGA nowadays?
#1
Hi, 

Earlier I used SDK V1 to compile C codes to run over FPGAs, however, I used it with an older version of the RTL. Many changes have been made to the RTL and a new SDK version has been released. 

However, the new SDK doesn't have instructions on how to compile applications for FPGA targets neither I see the same directory structure as the old one.

When I used the V1 SDK to compile the application to run over the Nexys A7 using the new RTL, I faced this issue: 

Quote:19 #include <stdio.h>

20 #include <rt/rt_apt.h>

22 int __rt_fpga_fc_frequency = 10008000; // e.g. 10000800 for 10MHZ;
23 int __rt_fpga_periph_frequency = 5000000; // e.g. 5000000 for SMHZ;
24
(gdb) list

26 int main()

27 {

28 while (1) {

29 printf("Hello World!\n\r");

30 for (volatile int i=6; 1<1000008; i++);

31 }

2 return 0;

(gdb) continue

Continuing.

^c

Program received signal SIGINT, Interrupt.
0x1c009452 in __rt_exit_debug_bridge (status= -1)  at libs/i0/10.c:560
 __rt_bridge_clear_notif();

Please advise, thanks!

Also, when I connect GDP with the OPENOCD, I get the following message:

Target-supplied registers are not supported by the current architecture 0x1a000080 in ?? ()
Reply
#2
This strange but fun new clicker game on Steam, called banana game, has taken the platform by storm. The game, which came out in April 2024, is all about clicking on a banana. There's more to it than just raising a counter when you click on the banana.
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)